This Misc | Print Graph command lets you print the contents of the DS Relays Window. For best results the printer should be set up for the landscape orientation.
TO PRINT THE CONTENTS OF DS RELAYS WINDOW:
1. Select the Misc | Print command.
Note: The print preview feature is not available for relay curves.
A dialog box will appear asking you for the printing parameters. The current printer is shown in the margins are shown in the Printer and Paper group box. The current typeface and font size are shown within the Printer Font group box.
2. Enter the page margins.
The plot will be surrounded by empty spaces on four sides. The Margins control the dimension of the empty spaces.
3. Click on "Change Font" to change the font.
A dialog box will appear asking you to specify the font.
Use the controls in the standard font selection dialog box to select the font, font style and size you want. Press OK.
4. Enter a scaling factor in "Scaling factor".
The scaling factor allows you to adjust the size of the image on the printed page. When the scaling factor is less than 1.0, a larger portion of the plot will be printed. The scaling factor does not affect the font size.
5. Mark Print black and white to disable color printing.
6. Press Print. The dialog box will disappear and printing will begin.
DS Relays Window
MISC MENU