The Delete | Object command in the Main Window lets you delete a piece of equipment from the network. To execute this command you must first select the equipment.
TO DELETE A PIECE OF EQUIPMENT:
1. Click the left mouse button once on the piece of equipment you want deleted.
The equipment symbol will turn dotted red when selected.
2. Select the Network | Delete | Object command.
IF YOU ARE DELETING A BUS:
When you delete a bus, the program automatically deletes everything that is attached to the bus. This includes the generator, load and shunt on the bus as well as all the connected branches. The bus and the attached equipment will disappear from the one-line diagram.
IF YOUR ARE DELETING A LOAD, GENERATOR, SHUNT, LINE, PHASE SHIFTER, TRANSFORMER, SWITCH OR DC LINE:
The selected equipment will disappear from the one-line diagram. The program will automatically update the network data.
IF YOU ARE DELETING A RELAY GROUP:
The program will ask for your confirmation to delete the relay group and all the protective devices that are within the group. If you answer ‘Yes’, the relay group will disappear from the one-line diagram.
Note: You can alternatively use the command Relay | Delete Relay Group to remove a relay group.
Main Window
NETWORK MENU