The Delete Mutual Coupling Pair command in the Main Window lets you to remove the mutual coupling between two transmission lines. You must select the lines on the one-line diagram before executing this command.
TO DELETE A MUTUAL-COUPLING PAIR:
1. Select the two lines.
You can most easily see which lines are mutually coupled if you execute the View | Mutual Pairs on 1-Line command. The lines you select for this command must belong to the same mutual pair.
Click the left mouse on one of the lines. With the Shift key held down, click the left mouse on the other line.
Both lines will appear highlighted.
2. Select the Network | Delete | Mutual Coupling Pair command.
Note: This menu item is dimmed and cannot be activated if the selected lines do not belong to a mutual coupling pair.
A dialog box will appear asking you to confirm the deletion of the mutual coupling pair.
3. Press OK.
The dialog box will disappear and all mutual coupling pair between the selected lines will be deleted.
Main Window
NETWORK MENU