The Add | Damage Curve from Library command in the OC Curves Window lets you add a damage curve from the relay library to the plot. Any damage curve can be shown here, including conductor burn down curves and insulation damage curves. In order to show a damage curve with this command, the curve must have been entered into the relay library specifically as a damage curve. See ASPEN Overcurrent Curve Editor User's Manual for details.
TO ADD A DAMAGE CURVE FROM A RELAY LIBRARY:
1. Select the Add | Damage Curve from Library command.
Note: This command is dimmed and cannot be activated if there are already 6 damage curves on the plot.
The Curve Selector will appear.
2. Select a damage curve from the Curve Selector.
3. Enter comments with up to 32 characters in 'Comments'.
Your comments will be displayed on the screen as part of the curve identification.
4. Press "Select this curve".
The dialog box will disappear and the damage curve will be drawn on the plot.
Curves Window
ADD MENU