Experienced users will tell you that certain things can be done faster with keyboard accelerators. For example, using the View | Find Bus By Name command with the mouse means moving the mouse to the View menu, clicking on the menu and selecting the Find Bus By Name command. You can do the same thing by striking the ‘F’ key.
The keyboard-accelerator equivalent of a command, if available, is shown directly on the pop-up menu. For example, on the View | Find Bus By Name command, you will see: “Find Bus By Name F “
The accelerators for the various windows are listed below. (You can use either upper or lowercase characters.)
Main Window Accelerator Command
<F1> On-line help.
1, 2, 3, 4 or 5 Zoom Size 1 through 5 (for backward compatibility with V9)
A View | Find Annotation & Worksheet
<Ctrl> + <Alt> + A Faults | Arc Flash Hazard Calculator | IEEE 1584-2018
B PFlow | Solution Browser (Power Flow only)
C Relay | View Relay Curves
<Ctrl> + C Network | Copy
D Network | Delete
<Delete> Network | Delete
<Ctrl> + D File | Compare Files
<Ctrl> + <Alt> + D File | Case Builder
E View | Go To End Bus
F View | Find Bus By Name
<Ctrl> + <Alt> + F Faults | Batch Command and Fault Spec File | Execute
G Network | Change | Toggle Switch
<Alt> +Left Arrow Re-center the 1-line diagram to the last recorded position.
I Network | In/Out of Service | Put in Service
L PFlow | Power Flow (Power Flow only)
<Ctrl> + L Faults | Fault Locator (OneLiner only)
<Ctrl> + M File | Merge Files
N View | Find Bus By Number
O Network | In/Out of Service | Take Out of Service
<Ctrl> + O File | Open Binary Data File
P File | Print One-Line Diagram
Q Relay | Form Coordination Pair
R Tools | PowerScript Dashboard
<Ctrl> + R File | Reload File from Disk
S Faults | Specify Classical Faults
<Ctrl> + S File | Save
T Faults | Stepped Event Analysis | Single User-Defined Event
<Ctrl> + T Network | Apply Tag
<Ctrl> + <Alt> + T Network | Tag Browser
V Faults | Show Solution on 1- Line
X View | Plain 1- Line
<Ctrl> + V Network | Paste
W Tools | Data Browser
Z Diagram | Place Bus
<Ctrl> + Z Tools | Undo
Curves Window Accelerator Command
<Ctrl> + A Add | Relay Curves
<Ctrl> + D Add | Conductor Damage Curve
<Ctrl> + F Show | Relay Operations for 1 Fault
<Ctrl> + G Add | Transformer Damage Curve
<Ctrl> + P Misc | Print Graph
<Ctrl> + T Edit | Rearrange Caption
<Ctrl> + U Show | Relay Operations for all Faults
DS RelayS Window Accelerator Command
1,2,3,4,5,6,7 or 8 Zoom Size 1 through 8 (for backward compatibility with V9)
<Ctrl> + A Add | Relay Characteristics
<Ctrl> + F Show | Relay Operations for 1 Fault
<Ctrl> + G Misc | Grid On/Off
<Ctrl> + L Add | Load Region
<Ctrl> + O Edit | Find Origin
<Ctrl> + P Misc | Print Graph
<Ctrl> + T Edit | Captions
<Ctrl> + U Show | Relay Operations for All Faults